Reverse Osmosis RO Replacement Filter 10″ 5 – pcs set – 75GPD

• Set of 5 pieces Replacement Filters for 5-Stage RO systems
• Fits most standard 10″-housing reverse osmosis water filter systems
• 75GPD TFC membrane, and can be upgraded to 100GPD

A complete set of replacement filters and membrane for 5-stage reverse osmosis systems, individually wrapped in films for freshness.

from Ebay’s top-rated seller: 123filter*com

What Are Included

- 1 piece of 5 Micron Sediment Filter: With

Our Price: $ 59.99

More Reverse Osmosis Water Products

Stay Cosy in the Bathroom with a Bathroom Heater Fan

A hot bath or shower works wonders during the chilly months but the one drawback is having to go into an unheated bathroom to prepare for your ablutions. Just the thought of entering a cold bathroom is almost enough to dash the idea of that welcome hot water. And then there’s the uninviting prospect of getting out of the hot bath or shower back into the cold bathroom. There’s also the danger of catching a cold from standing around in a cold bathroom to perform your morning ritual and waiting for your bath or shower to be ready. Fortunately the ideal solution is at hand in the form of a bathroom heater fan – a safe, compact and efficient device to heat up your bathroom. With a bathroom heater fan installed, you just flick a switch to heat up your bathroom in moments.

Other than making your bathroom warm, these heaters offer other benefits. For one thing, they help reduce humidity in your bathroom. Moisture tends to build up in the atmosphere of your home, especially in bathrooms. This humidity can promote the growth of mold on your tiles and other parts of the room. It can also lead to the growth of mildew on any cloths and linens kept there. Regular use of a heater helps reduce high levels of humidity and prevent the growth of molds. It will also clear your mirrors and windows of condensation resulting from excess moisture in the air.

Bathroom heater fans are light, compact and powerful. These heaters weight just over one kilogram and can pump out some two kilowatts of heat at the tug of a pull cord. Typical dimensions are extremely compact – a height of 245mm, a width of 235mm and a depth of just 95 mm – perfect for smaller rooms. Generally the controls are very simple with most offering two levels of heat. And the visual heat setting indicators keep you informed of the current level of heat. The fan-driven downflow sends the heat to exactly the right spot which makes these units highly efficient. And as they’re only turned on when needed, they’re very economical to use.

Bathroom heater fans are easy to install. It’s just a matter of screwing the supplied wall mounting bracket and attaching the heater. You can install them on surfaces with normal flammability such as wood, plasterboard or masonry. However, when installing your new bathroom heater you need to remember that certain laws apply to the installation of electrical items in bathrooms.

Essentially, IEE regulations stipulate that a heater in a bathroom must be out of the reach of anyone using a bath or shower. The area determined as safe for the mounting of wall heaters is known as Zone 3 and a permanent connection to the mains supply must be made. These regulations change so you may want to consult a qualified tradesman who’s up to date with these matters. Or you can download the latest information from HMSO.

These heaters are not limited to use in your bathroom. If you don’t look forward to entering your cold kitchen, just install a fan heater there to get the same fast and economical heating at the tug of a cord. Kitchens do warm up quicker than bathrooms owing to the presence of ovens, toasters and other cooking appliances but first thing in the morning, they can be cold, and not the cosy place you want to enjoy family breakfasts.

The bathroom is the first place we head in the mornings but during winter, the thought of leaving our warm beds to enter an unheated room is enough to make us linger in bed a while longer. And at night a cold bathroom is a very uninviting place. However, using a bathroom heater fan is the perfect way to heat up your bathroom and other rooms in your home. It’s efficient and as you only turn it on when you need it, it’s very economical. Taking care of your heater is a simple matter of cleaning with a soft dry cloth. Who could ask for more?

To find the best deals on bathroom heater fan, visit the websites of online vendors and make your choice from their illustrated catalogues. Just place your order on the web site and your heater will be delivered in just a few days.

Related Soft Water Heaters Articles

Water Purifiers

Are you living an Eco-friendly life?? If yes then you need to think over it once again, probably you are like most of the crowd which are not clear about the very important fact that we need to know; A large number of population of the world use mineral water bottles that we call packed water too in the expectation to drink pure and hygienic water, but these plastic bottles are dumped here in there wherever they find it suitable which in fact makes our environment and land polluted, as these used bottles generate toxic being some sort of plastic, and sometimes these same used bottles are re-used and supplied to the same people who use and throw it, and now this contaminated water is the main cause of 84 % of deadly diseases, so don’t compromise with your health that may also cut down your wealth.

Go Green slogan will not work out that in practically should be on global priority objective and if still you are confused about being eco-friendly then do a favor on environment by saving energy and making your habits environment friendly, coming to the point again, most of us are not aware of the water quality that is been supplied for drinking purpose, sometimes the claimed purified water don’t stand on the standards.

So what to do? Bring your home a water purifier which is an actually eco-friendly appliance or you can take it as the basic step towards the global objective and most important for staying healthy, Now a days an all new market has been emerged, and various brands have jumped into the production of water purifiers in the race of offering you the best technology purifier that won’t even stress your budget, these are really affordable, there are three types of water purifiers which are available in the market; faucet water purifiers, Carafe or jug water purifiers and under sink water purifiers.

So now you can think of your usage, space & budget, and on whatever conclusion you would get on, there will be some kind of water purifier that is going to fit on all the respective aspects.

Faucet Water Purifiers are the most commonly used water purifiers at household level as these are pretty cheap to afford and maintenance goes so easy, these type of water purifiers are easy to install, and its filter can be changed & cleaned at regular intervals and even the water pressure may be reduced. The second Carafe or jug water purifiers are the attached with the carbon filter, at bottom it is been fitted with the spigot where the filtered water get collected, these are again easy to use, economical and portable purifiers which are mostly placed in Refrigerators but it purifies a limited amount of water at a time which can be drawback in some conditions, the third type of water purifiers are under sink water purifiers which are now come into fashion, you will notice them in almost every of the modular kitchen, it is fitted under the sink, you can also use them into the bathroom as well, and it can filter the water in volume.

One2tap Chrome Faucet Adapter,a Smart Faucet that eliminates all water waste at the faucet and saves up to 15,000 + gallons per unit per year!

• The One2tap is a water conservation device that eliminates 100% of water waste at the faucet.
• It’s perfect for homes, recreational vehicles, boats, hospitals and nursing homes.
• It’s perfect for smaller children to wash their hands without needing a parent to turn the faucet valves for them.
• also hygienic. By eliminating the need to touch the faucet valves, cross-contamination of the valves is avoided, and the spread of bacteria is reduced.
• Plus, the One2tapTM handle has antimicrobial properties, which further reduces the spread of bacteria.

The One2tap TM is the one touch faucet that is perfect for homes, recreational vehicles, boats, hospitals, and nursing homes. The One2tapTM has practical uses for children, the disabled, and the elderly. The One2tapTM is hygienic, convenient to use a

Our Price: $ 29.94

More Water Conservation Products

Water Coolers are essential for public places now days

Ever heard of “water cooler meetings”? Well these are those meetings which are held specifically around the water cooler, in large offices to take a break from the monotony of work and discuss some of the more interesting news. These can be newsworthy current events, office gossip, boss’ bad talks, etc. In its basic sense, water cooler is a device that cools and dispenses water in a controlled manner. Some coolers use air pumps to push water into the cooling chamber and palter devices to chill the water, instantly. There are two types of water coolers: bottle-less water cooler and bottled water coolers. The bottle-less water cooler uses the tap water, filters it through reverse osmosis and then takes it to the palter device to cool this water and then used for drinking. Bottle-less water cooler are wall-mounted and connected to building’s water supply for continuous water supply and is useful in schools and colleges where large number of people require large amount of water. The only arrangement to be made is to make arrangements for waste water disposal system to make proper use of waste and avoid wastages. The other variety of water coolers is referred to as water fountain or drinking fountain. In this machine, a small tank in the machine holds chilled water and the user needn’t wait for chilled water. The quality of water depends up on the quality of bottled water. The machines used are generally free-standing where bottle is placed upside down and are again categorized into two, one is table units, intended for occasional use and floor mounted units for heavier use. Bottles when get empty are exchanged for the filled ones and people get chilled water to drink. Another option is of hot water or normal water supply in the same machine. Hot water supply facilitates tea making and soup making easier. In case you want the best quality, evenly priced, easy to use and durable water coolers, and then log on to shopping portal. These water coolers are branded and company takes full guarantee of the product.

Water, Population & Conflict in the Middle East

Dr. Hasan A. Yahya

When war plans begins, logic takes the backseat of politics, as I see it, these days, nations in the Middle East (including Israel) are now dedicated for the task of self destruction, unless….. (the author).

 Water is a vital resource, necessary for all aspects of human and ecosystem survival and health. In recent years, new alarms have been sounded about growing water scarcity and contamination and the likely inability to meet the water requirements of rapidly growing populations .(Postel 1992, Gleick 1993, Engleman and LeRoy 1993, Yahya 1994, 2010).

As the human population of the planet grows, our demand for freshwater dramatically increases. Yet, there exist large disparities between supply and demand. Further, environmental mismanagement has seriously degraded the quality of available water supplies, many of which are polluted, misdirected, or simply wasted.

Globally, the great variations in current per-capita water availability for each continent  show that  Oceania has over 70,000 cubic meters per person per year (m3/person/year),  North Americans use over 1,600 cubic meters per person per year, while the average in Europe is 725 m3/person/year. For all of Africa is under 7,000 m3/person/year, while that of Asia  is only 3,400 m3/person/year. some countries in Northern Africa and the Middle East have less than 100 m3/person/year reflecting the limited physical resources available, the large populations, and poorly developed water-supply systems. (Gleick 1993).  

The United States and Mexico are among many countries in the Americas that share water resources. Waters that form in or flow though one country are vital to livelihoods in another. For example, Syria is most unhappy with Turkey’s GAP project,  which plans to dam the Euphrates and Tigris Rivers that flow downstream to Syria and Iraq. Meanwhile, troubled Sudan controls much of the water that flows into Egypt’s Aswan High Dam on the Nile River water Forums help facilitate discussion about responsible management, but ultimately it is up to water users to decide how to use available water equitably and efficiently.

This article, deals briefly with population and water shortages, historical background, the necessity of water requirements for populations in the Middle East, and how Water as a precious and limited resource in the region, became a potential trigger for serious national conflicts in the area. Finally a  set of conclusions are drawn.

Water and Population: In terms of population, throughout most of human history, the world’s population has grown gradually. It took thousands of years for the global population to reach one billion people (around 1800). Then, in a little more than a century, the population jumped to two billion (by 1960), and to three billion by 1980. In just twenty years—between 1980 and 2000—the world’s human population doubled from three billion to six billion people.

In terms of water, in old history the Egyptians and Sumerians built elaborate irrigation systems based on the waters of the Nile and the Tigris-Euphrates. These required planning, central administration and cooperation – this need may have been the major stimulus for the advancement of civilization. Later, the Nabateans who inhabited southern Israel and Jordan, built a great network of cisterns and underground reservoirs to catch rainfall and runoff from flash floods in the Negev desert. The desert city of Petra is an example of what this civilization achieved.

Almost two hundred years ago, the average amount of water available per person (in 1850 for example) was about 43,000 cubic meters per year. By 1990, this figure had dropped to 9,000 cubic meters per year, simply because of the increase in global population. When measured this way, the spatial and temporal distribution problems become even more evident for reasons such as low rainfall and high erratic and evaporation.  Rapid population growth, relative to water resource development, is reducing per capita use. The Middle East region has rivers that originate outside and short seasonal or perennial rivers.

Conflict and water, are intimately related everywhere and across time in history. According to the above data, fresh water resources are unevenly distributed around the world, The Middle East is no different. Since the creation of Israel, the factor of water became acute and played an important factor in land domination and borders drawings. No doubt that water was the hidden agenda for past conflicts and one major obstacle to reach a lasting and final settlement in the region. The conflicts over water is not just between Israel and her neighbors, but among Arab nations as well.

Most of the resources  are controlled largely by Israel.  Syria lost its important  area of 66 square kilometers in the Golan Heights, in the 1967 war. While all countries claim water resources, These resources are near ending. In the past few millions of people reside in the area and depended on water. Today, the population was large enough to make governments ration water supply to citizens.    

From Turkey, the southern bastion of Nato, down to Oman, looking out over the Indian Ocean, the countries of the Middle East are worrying today about how they will satisfy the needs of their burgeoning industries, or find drinking water for the extra millions born each year, not to mention agriculture, the main cause of depleting water resources in the region. 

All these nations depend on three great river systems, or vast underground aquifers, some of which are of `fossil water’ that cannot be renewed. 

Take the greatest source of water in the region, the Nile. Its basin nations have one of the highest rate of population growth which are likely to double in less than thirty years, yet the amount of water the Nile brings is no more than it was when Moses was found in the bulrushes. 

Jordan’s population more than doubled from 1.5 millions in 1955 to 4 millions in 1990 and is projected to double again before 2010. Their annual per capita water availability in 1990 was 327 cubic meters some 673 below the bottom line of crisis.

Israel’s population is projected to grow from 4.7 millions in 1990 to about 8 million in 2025. By that time Palestinians in the west bank – because of their higher birth rate, are likely to reach just under seven millions- the two peoples are to share the same water resources which they both now say are not enough.

Libya’s population of 4.5 million in 1990 is projected to increase to 12.9 million in 2025 and the oil revenues enabled the government to increase dependency on desalination, but they diverted – or rather wasted massive resources on a white elephant, the great man made river to mine fossil water in the south.

Egypt’s 58 Million in 1990 are projected to reach 101 Millions in 2025 and already approaching water scarcity: its per capita availability is 1,017 

In the case of Renewable fresh water resources there is no universal uniform on it since there is no international consensus on how to define and measure renewable fresh water resources. 

* The list of water-scarce countries in 1955 were seven including three Middle Eastern countries : Bahrain, Jordan and Kuwait. 

By 1990, 13 were added among them eight from the Middle East : Algeria, Israel/Palestine , Qatar, Saudi Arabia, Somalia, Tunisia, United Arab Emirates, and Yemen. 

UN studies anticipate to add another 10 countries by the year 2025 seven of them are from the Middle east : Egypt, Ethiopia, Iran, Libya, Morocco, Oman and Syria. This mean that by the year 2025 some eighteen countries in this troublesome region will suffer from water shortages. 

Israel uses underground water sources in the West Bank, which are the main sources of water for the Tel Aviv metropolitan area for example. 

Water Shortages in the Middle East: From Turkey, the southern bastion of NATO, down to Oman, looking out over the Indian Ocean, the countries of the Middle East are worrying today about how they will satisfy the needs of their burgeoning industries, or find drinking water for the extra millions born each year, not to mention agriculture, the main cause of depleting water resources in the region.  Middle East Countries, in fact,  suffer from a shortage, and the scarcity of water is used as a political issue and a lever.

All these nations depend on three great river systems, or vast underground aquifers, some of which are of `fossil water’ that cannot be renewed. 

Take the greatest source of water in the region, the Nile. The Nubian aquifer in North Africa were filled when water infiltrated the earth’s subsurface in past geological years. When we refer to fossil water in an aquifer, it is water trapped since the ice age and there is no certainty how long it would take to replenish them, thus it safe to conclude that mining their water is only a temporary solution. In the same time, the Nile basin nations have one of the highest rate of population growth which are likely to double in less than thirty years, yet the amount of water the Nile brings is no more than it was when Moses was found in the bulrushes. 

Although all natural water resources are replenished through the natural hydrological cycle, their renewal rate ranges from days to millennia. The average renewal rate for rivers are about 18 days – that is to renew every drop taken out – while for large lakes and deep aquifer they can span thousand years.

In general a country with less than 1,700 cubic meter per capita is regarded as experiencing water stress, while less than 1000 cubic meter is regarded as water shortage.  The Arabian Peninsula is poor in surface water but has larger groundwater

The EdenPure Heater Quartz Infrared Heating System

When you turn on the heat in your house you just want to feel comfortable within your home.  To be able to maintain that comfort is not cheap.  However, there are simple solutions to help you.  Increasing the efficiency with which your home is heated is easy to do, and can prove to be financially beneficial as well.  The EdenPure heater offers a new technology for efficient heating of the home.

The EdenPure systems are quartz infrared heaters.  This means they heat a room by releasing infrared heat, a method similar to how the sun heats Earth.   Other heating systems rely on combustion, which is the burning of a fuel, or resistance, which is running an electrical current through a coil or resistor.  Both of these methods have significant drawbacks including: pollution, cost, uneven heating, and extreme heating of the materials which compose the heater.

The method by which heating occurs within the EdenPure quartz heater is far different from other heaters.  Infrared quartz tubes are heated using micro-electronic technology.  This heat is absorbed by 3 copper furnaces in the same way a sponge soaks up water from its surroundings.  This heat is then released as a “soft” heat which rapidly disperses through the air, as opposed to a burning heat which is the case with standard furnaces.  This is a replication of the natural solar processes of the Earth where energy is absorbed, stored, and released slowly when environmental conditions warrant it.  The relative humidity within the air allows the heat to be transferred quickly.  The EdenPure heaters do not burn away the humidity.  Losing the humidity from the air is both uncomfortable and unhealthy.  Breathing dry air can cause problems such as asthma and allergies.  Additionally, by maintaining a higher relative humidity within your home the air will feel more comfortable at lower temperatures, allowing you lower your heating settings.

Quartz heaters release an even steady heat throughout the room.  Many traditional heaters will have a significant temperature gradient between the top and bottom of a room as hot air rises.  This is both uncomfortable and inefficient.  The infrared heating does not immediately collect near the ceiling of a room.  Heat is evenly dispersed due to the method by which the heat is generated.  The slow steady release of consistent heating allows for a better maintained environment.  When a traditional furnace is turned on, a large amount of superheated air is released all at once.  This air immediately rises to the ceiling in a room, which causes the cooler air to sink.  This results in a room with unbalanced heat distribution which will feel uncomfortable cold to anyone in the lower portion of the room, where people spend all their time, even though there is a significant amount of hot air which was just released into the room.  Using infrared heating allows for a much more homogeneous environment within any room with no sudden infiltrations of superheated air.

Quartz infrared heaters provide a significant safety benefit over other heating methods: the materials which compose the heater do not become excessively hot.  There are no hot surfaces with the infrared heating technology.  Since the heating method does not rely on combustion, extreme temperatures are never created within the heater.  The heat that is generated is dispersed in a rapid and even manner.  The heaters feel warm to the touch, but will not reach temperatures which can burn any people or pets.

In addition to the safety benefits, these EdenPure heaters provide multiple health benefits.  In addition to the humidity remaining in the air as described above, the air quality within your house will be improved as well.  Typical combustion heaters produce significant amounts of dust.  The infrared heating method requires no burning, and thus does not generate any dust which will be released into the atmosphere.  The air quality also will be improved due to your standard furnace running less often.  This will prevent the air filter from deteriorating as quickly, further reducing the amount of dust released into your air.

Another type of EdenPure heater using new technology is the line of PurATron fireplaces.  While they appear to be a standard gas burning fireplace, they actually make use of infrared heat as well.  All of the features previously discussed still apply except the design of the heater is that of a fireplace.  The heating method is unchanged.

Reverse Osmosis Water Softener

A reverse osmosis water softener is a type of filter that removes minerals from water by forcing the water through a semi-porous membrane. The membrane captures the minerals as well as other harmful chemical contaminants like arsenic and lead, and it removes materials like chlorine that affect water’s taste and smell. A reverse osmosis water softener is an alternative to using mechanical and chemical water softeners, which use sodium to remove the minerals that make the water hard.

Osmosis is the chemical process where water is drawn through a membrane in order to dilute the salts on the other side. It is the process plants use to take water from the soil. In a reverse osmosis water softener, this natural pressure of diluted water moving to concentrated water is overcome by forcing the water through a semi-permeable membrane at high pressure. The membrane, usually made of polyimide, traps the salts, minerals, and chemicals while allowing the clean water to pass through. Reverse osmosis filters leave wastewater, usually 5%-15% of the water taken into the system.

Reverse osmosis water filters usually work in conjunction with other types of filters such as activated carbon to more effectively remove all contaminants from the water. The activated carbon also protects the reverse osmosis membrane from excess chlorine, which damages its surface. Neither of these types of filters can remove all bacteria from water however, so the polyimide membrane in a reverse osmosis water softener must be cleaned or changed regularly to prevent bacteria from building up. Wastewater containing high concentrations of salt, minerals, and chemicals must also be properly and safely disposed of.

Hard water is water that contains high concentrations of lime, calcium, and magnesium. While the minerals in moderately hard water make it better tasting and usually healthier to drink than soft water, soft water is better for other uses like cleaning and washing. Hard water prevents soap from working effectively, and it leaves a dull mineral film on clothes, hair, skin, and household surfaces. Hard water causes lime scale build-up inside appliances, which slows their function and shortens their lives.

Reverse osmosis water softeners are sometimes used to clean all household water except drinking water, unless the water is extremely hard and not good for drinking. They can also be used to filter drinking and cooking water, which may also contain arsenic, lead, copper, chlorine, and other contamination that makes it unsafe to consume.

More Reverse Osmosis Water Articles

Cuisinart DCC-RWF Replacement Coffeemaker Water Filters, Set of 2

• Set of 2 charcoal water filters helps ensure deliciously fresh home-brewed coffee
• Removes chlorine, odors, calcium, and other water impurities prior to brewing
• Simple-to-install design; requires replacing every 60 days or after 60 uses
• For use with Cuisinart models DCC-1000BK, DCC-1200, DGB-600, DCC-2000, and DCC-2200
• Measures approximately 1-1/2 by 2-4/5 by 5 inches

Coffee is 98 percent water. Often overlooked, the quality of the water is as important as the quality of the coffee. A good rule of thumb is that if your water doesn’t taste good from the tap, it won’t taste any better in your coffee. That’s why Cuis

Rating: (out of 116 reviews)

List Price: $ 0.00

Our Price: $ 4.50

Find More Home Water Filters Products

Enjoy your Garden and Patio for longer with a Gas Patio Heater

With the increased new trend in outdoor living, which has undoubtedly been by TV Gardening DIY programs, we are all spending more money on our garden and patio areas. Creating an inspirational outdoor living space is something we can all do, with a wide range of hard and soft landscaping products, lighting, decorations and garden accessories available widely on the market.

Some of the latest innovations are in garden heating which allows us to spend more of our precious leisure time enjoying our garden or patio area, be it for entertaining family and guests or simply for relaxing. Gas patio Heaters provide instant controllable heat and warmth, thus making your outside room as comfortable and enjoyable as any of your inside rooms. On days when the temperature is not as warm as one would like, the patio heater can be turned on to give off a heat circle of around 6 metres and gas patio heaters come into their own after sun set, when they create atmospheres from party to tranquil.

When choosing a gas patio heaters always ensure that it has the necessary safety features such as; a tilt sensor, which will cut off the gas and flame if the patio heater is knocked or blown over whilst in use and also an auto shut off switch will cut off the gas if the flame is blown out.

Patio heaters come in many shapes and sizes, but by far the most popular are the upright standing heater, sometimes available with a circular table around the gas bottle housing, and the table top patio heater. Heat output is measured in Kilowatts and sizes range from 12 kw up to 15kw gas patio heaters, which are usually used for pub, hotel and commercial environments. Finished gas patio heaters usually range from coloured powder coated to the more expensive stainless steel models. The main difference in finishes relate to the likely life of the heater. Stainless steel patio heaters look by far the most impressive and will keep their lustre for many years. Powder coated patio heaters tend to weather slightly less well and will rust if the powder coating is damaged.

Table top heaters are very popular but are a lot smaller and also have a much smaller heat output but they are a very effective way of providing heat to people immediately around the garden table.

Accessories for Patio heaters include covers ( which are a must is you intend to leave it outside during the winter), wheels — which will enable you to easily move the heater around the garden, ballast tanks which give extra stability and most good patio heaters actually come with a gas bottle regulator installed and ready for easy attachment.

Patio heaters run off bottles gas, mainly butane but sometime propane which is widely available in the UK and most other countries. The regulator which is usually supplied with the heater, clips straight onto the bottle and is easy to install. Gas regulators are supplied by all gas bottle suppliers, but ensure that you take you gas bottle along to the dealer as there are varying sizes of bottle head.

Patio heaters require very little maintenance if any at all, and will give extend your time in your garden or on you patio.

Some safety points worth remembering are;

Position in a fairly sheltered area, as this will both reduce the likelihood of damage in strong winds and also increase the amount of ambient heat output.If the heater is outdoors during the winter, buy a patio heater cover and protect you heater with it.Always leave the gas bottle in the heater to give it extra weight.If you patio heater comes supplied with a ballast tank in the base, fill it with sand or if none is available, use water but mix car anti-freeze with it, otherwise the tank may crack when freezing occurs in winter.Do not let children use the patio heater as a toy or climbing frame.

Enjoy long nights throughout the year with your patio heater — your life will take a new turn into outdoor living.

Created on January 6, 2010 using FlipShare. Check out our website here at www.DrewsRoofingAndHomeRepair.com This is a mobile home we are working on that Raccons got into and destroyed the floors. Drew’s Roofing and Home Repair Dedicated to the customers. Brunswick County NC Home Repair Contractor, Oak Island NC Mobile Home Repair, NC Mobile Home Repair Water damage is a killer in mobile homes, This is why any water damage – a water heater leak, a flooded toilet or a spilled water dish can cause weak or soft spots in the floor. You cant fix the particle board once its been damaged. It becomes soggy, like a cardboard box, when it gets wet. While you cant undo this damage, you can get rid of the problem by laying down a new floor, one thats sturdier than the old one and certain to stand up to water and other damage. The piece-by-piece option is time-consuming and difficult to do correctly. Tools You Will Need Claw hammer Tape measure Jigsaw or circular saw Safety glasses (catching a wood chip in the eye isnt fun) A pencil for marking your cuts in the new flooring Straight-edge (usually a carpenters square or a construction level)